Tungsten Sulfide WS2 sputtering targets use in thin film coating CAS 12138-09-9
Country of Origin︰
US $ 200 / pc
Tungsten Sulfide (WS2) Ceramic sputtering target
Shape: Discs, disks, step disk, delta, plate, sheets or made per drawing
Diameter: 355.6mm (14") max.
Single piece Size: Length: <500mm, Width: <250mm, Thickness: >1mm, if larger size than this, we can do it as Tiles joint by 45 degree or 90 degree
Made sputtering targets method: hot pressing (HP), hot/cold isostatic pressing (HIP, CIP), and vacuum melting, vacuum sintering
Molar mass: 247.98 g/mol
Appearance: blue-gray powder
Density: 7.5 g/cm3, solid
Melting point: 1,250 °C (2,280 °F; 1,520 K) decomposes
Tungsten disulfide is the chemical compound with the formula WS2. It occurs naturally as the rare mineral tungstenite. This material is a component of certain catalysts used for hydrodesulfurization and hydrodenitrification.
We also supply beow Sulfide Ceramic sputtering target :
Iron Sulfide FeS, FeS2 99.9%
Manganese Sulfide MnS2 99.9%
Niobium Sulfide NbS2 99.9%
Tungsten Sulfur WS2 99.9%
Zinc Sulfide ZnS 99.99%
Cadmium Sulfide CdS 99.99%, 99.99%
Molybdenum Sulfide MoS2 99.9%
Tin Sulfide SnS, SnS2 99.99%, 99.999%
Antimony Sulfide Sb2S3 99.99%
Lead Sulfide PbS 99.99%
Copper Sulfide CuS, Cu2S 99.99%
Germanium Copper Sulfide Ge-Cu-S 99.99%
Germanium Sulfide GeS 99.99%
Copper Zinc Tin Sulfide Cu2ZnSnS4 99.99%
Lithium Sulfide LiS2 99.99%
Indium Sulfide In2S3 99.99%
Silver Sulfide Ag2S 99.99%
We have only listed the more popular material.
Please feel free contact us with any special requirements at any times, we will get back for you ASAP.